INSTALL - How to install and configure DBD::mysql |
INSTALL - How to install and configure DBD::mysql
perl Makefile.PL [options] make make test make install
This document describes the installation and configuration of DBD::mysql, the Perl DBI driver for the MySQL database. Before reading on, make sure that you have the prerequisites available: Perl, MySQL and DBI. For details see the separate section. PREREQUISITES.
Depending on your version of Perl, it might be possible to use a binary distribution of DBD::mysql. If possible, this is recommended. Otherwise you need to install from the sources. If so, you will definitely need a C compiler. Installation from binaries and sources are both described in separate sections. BINARY INSTALLATION. SOURCE INSTALLATION.
Finally, if you encounter any problems, do not forget to read the section on known problems. KNOWN PROBLEMS. If that doesn't help, you should look into the archive of the mailing list msql-mysql-modules@lists.mysql.com. See http://www.mysql.com for archive locations. And if that still doesn't help, please post a question on this mailing list.
configure --without-server
If you are using Windows and need to compile from sources (which is only the case if you are not using ActivePerl), then you must ensure that the header and library files are installed. This may require choosing a ``Custom installation'' and selecting the appropriate option when running the MySQL setup program.
In the worst case, this might mean to compile Perl and MySQL yourself. But believe me, experience shows that a lot of problems are fixed this way.
Binary installation is possible in the most cases, depending on your system. I give some examples:
ActivePerl offers a PPM archive of DBD::mysql. All you need to do is typing
ppm install DBI install DBD-mysql
This will fetch the modules via HTTP and install them. If you need to use a WWW proxy server, the environment variable HTTP_proxy must be set:
set HTTP_proxy=http://my.proxy.server:8000/ ppm install DBI install DBD-mysql
Of course you need to replace the host name my.proxy.server
and the port number 8000
with your local values.
If the above procedure doesn't work, please upgrade to the latest version of ActivePerl. Versions before build 623 are known to have problems.
PPM 3 is said to miss DBD::mysql in the repository. Thus use of PPM 3 is discouraged, in favour of PPM 2. If you need to use PPM 3, try
ppm rep add PPM2 http://ppm.activestate.com/PPMPackages/5.6plus/ rep 2 install DBI install DBD-mysql
As of version 7.1, Red Hat Linux comes with MySQL and DBD::mysql. You need to ensure that the following RPM's are installed:
mysql perl-DBI perl-DBD-MySQL
For installation from source the following RPM's are required
mysql-devel libz-devel
Optional are
mysql-server
In the case of Linux or FreeBSD distributions it is very likely that all you need comes with your distribution, as in the case of Red Hat Linux. I just cannot give you names, as I am not using these systems.
Please let me know if you find the files in your SuSE Linux, Debian Linux or FreeBSD distribution so that I can extend the above list.
So you need to install from sources. If you are lucky, the Perl
module CPAN
will do all for you, thanks to the excellent work
of Andreas Koenig. Otherwise you will need to do a manual
installation. Some of you, in particular system administrators
of multiple sites, will choose automatic installation. All of
these installation types have an own section. CPAN installation.
Manual installation. Configuration.
Installation of DBD::mysql can be incredibly easy:
cpan install DBD::mysql
If you are using the CPAN module for the first time, just answer the questions by accepting the defaults which are fine in most cases. If you are using an older version of Perl, you might instead need a
perl -MCPAN -e shell install DBD::mysql
If you cannot get the CPAN module working, you might try manual
installation. If installation with CPAN fails because the your
local settings have been guessed wrong, you might try to
create a script called mysql_config
. This is described in
more details later. Configuration.
For a manual installation you need to fetch the DBD::mysql source distribution. The latest version is always available from
http://www.cpan.org/modules/by-module/DBD/
The name is typically something like
DBD-mysql-1.2216.tar.gz
The archive needs to be extracted. On Windows you may use a tool like WinZip, on Unix you type
gzip -cd DBD-mysql-1.2216.tar.gz | tar xf -
This will create a subdirectory DBD-mysql-1.2216. Enter this subdirectory and type
perl Makefile.PL make make test
(On Windows you may need to replace ``make'' with ``nmake'' or ``dmake''.) If the tests seem to look fine, you may continue with
make install
If the tests fail, you might need to configure some settings. For example you might choose a different database, the C compiler or the linker might need some flags. Configuration. C Compiler flags. Linker flags.
For Windows/CygWin there is a special section below. Windows/CygWin.
The install script ``Makefile.PL'' can be configured via a lot of switches. All switches can be used on the command line. For example, the test database:
perl Makefile.PL --testdb=<db>
If you do not like configuring these switches on the command
line, you may alternatively create a script called mysql_config
.
This is described later on.
Available switches are:
-I/usr/include/mysql
On Windows the header files may be in C:\mysql\include and you might try
-IC:\mysql\include
The default flags are determined by running
mysql_config --cflags
More details on the C compiler flags can be found in the following section. C Compiler flags.
-L/usr/lib/mysql -lmysqlclient -lz
On Windows the libraries may be in C:\mysql\lib and
-LC:\mysql\lib -lmysqlclient
might be a good choice. The default flags are determined by running
mysql_config --libs
More details on the linker flags can be found in a separate section. Linker flags.
If a switch is not present on the command line, then the
script mysql_config
will be executed. This script comes
as part of the MySQL distribution. For example, to determine
the C compiler flags, we are executing
mysql_config --cflags mysql_config --libs
If you want to configure your own settings for database name, database user and so on, then you have to create a script with the same name, that replies
=head2 C Compiler flags
It is typically not so difficult to determine the appropriate flags for the C compiler. The linker flags, which you find in the next section, are another story.
The determination of the C compiler flags is usually left to a configuration script called mysql_config, which can be invoked with
mysql_config --cflags
When doing so, it will emit a line with suggested C compiler flags, for example like this:
-L/usr/include/mysql
The C compiler must find some header files. Header files have
the extension .h
. MySQL header files are, for example,
mysql.h and mysql_version.h. In most cases the header
files are not installed by default. For example, on Windows
it is an installation option of the MySQL setup program
(Custom installation), whether the header files are installed
or not. On Red Hat Linux, you need to install an RPM archive
mysql-devel or MySQL-devel.
If you know the location of the header files, then you will need to add an option
-L<header directory>
to the C compiler flags, for example -L/usr/include/mysql
.
Appropriate linker flags are the most common source of problems while installing DBD::mysql. I will only give a rough overview, you'll find more details in the troubleshooting section. KNOWN PROBLEMS
The determination of the C compiler flags is usually left to a configuration script called mysql_config, which can be invoked with
mysql_config --libs
When doing so, it will emit a line with suggested C compiler flags, for example like this:
-L'/usr/lib/mysql' -lmysqlclient -lnsl -lm -lz -lcrypt
The following items typically need to be configured for the linker:
F<libmysqlclient.a> statically linked library, Unix F<libmysqlclient.so> dynamically linked library, Unix F<mysqlclient.lib> statically linked library, Windows F<mysqlclient.dll> dynamically linked library, Windows
or something similar.
As in the case of the header files, the client library is typically not installed by default. On Windows you will need to select them while running the MySQL setup program (Custom installation). On Red Hat Linux an RPM archive mysql-devel or MySQL-devel must be installed.
The linker needs to know the location and name of the mysqlclient library. This can be done by adding the flags
-L<lib directory> -lmysqlclient
or by adding the complete path name. Examples:
-L/usr/lib/mysql -lmysqlclient -LC:\mysql\lib -lmysqlclient
If you would like to use the static libraries (and there are excellent reasons to do so), you need to create a separate directory, copy the static libraries to that place and use the -L switch above to point to your new directory. For example:
mkdir /tmp/mysql-static cp /usr/lib/mysql/*.a /tmp/mysql-static perl Makefile.PL --libs="-L/tmp/mysql-static -lmysqlclient" make make test make install rm -rf /tmp/mysql-static
On Unix you typically find the appropriate file name by running
ldconfig -p | grep libz ldconfig -p | grep libgz
Once you know the name (libz.a or libgz.a is best), just add it to the list of linker flags. If this seems to be causing problem you may also try to link without gzip libraries.
Below you find information on particular systems:
If you are a user of Cygwin (the Redhat distribution) you already know, it contains a nicely running perl 5.6.1, installation of additional modules usually works as a charme via the standard procedure of
perl makefile.PL make make test make install
The Windows binary distribution of MySQL runs smoothly under Cygwin. You can start/stop the server and use all Windows clients without problem. But to install DBD::mysql you have to take a little special action.
Don't attempt to build DBD::mysql against either the MySQL Windows or Linux/Unix BINARY distributions: neither will work!
You MUST compile the MySQL clients yourself under Cygwin, to get a 'libmysqlclient.a' compiled under Cygwin. Really! You'll only need that library and the header files, you don't need any other client parts. Continue to use the Windows binaries. And don't attempt (currently) to build the MySQL Server part, it is unneccessary, as MySQL AB does an excellent job to deliver optimized binaries for the mainstream operating systems, and it is told, that the server compiled under Cygwin is unstable.
Install MySQL (if you havn't already)
Build MySQL clients under Cygwin:
./configure --prefix=/usr/local/mysql --without-server
This prepares the Makefile with the installed Cygwin features. It takes some time, but should finish without error. The 'prefix', as given, installs the whole Cygwin/MySQL thingy into a location not normally in your PATH, so that you continue to use already installed Windows binaries. The --without-server parameter tells configure to only build the clients.
make
This builds all MySQL client parts ... be patient. It should finish finally without any error.
make install
This installs the compiled client files under /usr/local/mysql/. Remember, you don't need anything except the library under /usr/local/mysql/lib and the headers under /usr/local/mysql/include!
Essentially you are now done with this part. If you want, you may try your compiled binaries shortly; for that, do:
cd /usr/local/mysql/bin ./mysql -h 127.0.0.1
The host (-h) parameter 127.0.0.1 targets the local host, but forces the mysql client to use a TCP/IP connection. The default would be a pipe/socket connection (even if you say '-h localhost') and this doesn't work between Cygwin and Windows (as far as I know).
If you have your MySQL server running on some other box, then please substitute '127.0.0.1' with the name or IP-number of that box.
Please note, in my environment the 'mysql' client did not accept a simple RETURN, I had to use CTRL-RETURN to send commands ... strange, but I didn't attempt to fix that, as we are only interested in the built lib and headers.
At the 'mysql>' prompt do a quick check:
mysql> use mysql mysql> show tables; mysql> select * from db; mysql> exit
You are now ready to build DBD::mysql!
Build DBD::mysql:
cp /usr/local/mysql/bin/mysql_config .
This copies the executable script mentioned in the DBD::mysql docs from your just built Cywin/MySQL client directory; it knows about your Cygwin installation, especially about the right libraries to link with.
perl Makefile.PL --testhost=127.0.0.1
The --testhost=127.0.0.1 parameter again forces a TCP/IP connection to the MySQL server on the local host instead of a pipe/socket connection for the 'make test' phase.
make
This should run without error
make test
with DBD-mysql-2.1022 or earlier you will see several errors in dbdadmin.t, mysql.t and mysql2.t; with later versions you should not get errors (except possibly one, indicating, that some tables could not be dropped. I'm hunting for a solution to that problem, but have none yet).
make install
This installs DBD::mysql into the Perl hierarchy.
Notes:
This was tested with MySQL version 3.23.54a and DBD::mysql version 2.1022. I patched the above mentioned test scripts and sent the patches to the author of DBD::mysql Jochen Wiedman.
Georg Rehfeld 15. Jan. 2003
LD_RUN_PATH="/usr/lib/mysql:/lib:/usr/lib" gcc -o blib/arch/auto/DBD/mysql/mysql.so -shared -L/usr/local/lib dbdimp.o mysql.o -L/usr/lib/mysql -lmysqlclient -lm -L/usr/lib/gcc-lib/i386-redhat-linux/2.96 -lgcc -lz /usr/bin/ld: cannot find -lz collect2: ld returned 1 exit status make: *** [blib/arch/auto/DBD/mysql/mysql.so] Error 1
If this is the case for you, install an RPM archive like libz-devel, libgz-devel, zlib-devel or gzlib-devel or something similar.
t/00base............install_driver(mysql) failed: Can't load '../blib/arch/auto/DBD/mysql/mysql.so' for module DBD::mysql: ../blib/arch/auto/DBD/mysql/mysql.so: undefined symbol: _umoddi3 at /usr/local/perl-5.005/lib/5.005/i586-linux-thread/DynaLoader.pm line 168.
This means, that your linker doesn't include libgcc.a. You have the following options:
The solution is telling the linker to use libgcc. Run
gcc --print-libgcc-file
to determine the exact location of libgcc.a or for older versions of gcc
gcc -v
to determine the directory. If you know the directory, add a
-L<directory> -lgcc
to the list of C compiler flags. Configuration. Linker flags.
install_driver(mysql) failed: Can't load '/usr/lib/perl5/site_perl/i586-linux/auto/DBD/mysql/mysql.so' for module DBD::mysql: File not found at /usr/lib/perl5/i586-linux/5.00404/DynaLoader.pm line 166
then this error message can be misleading: It's not mysql.so that fails being loaded, but libmysqlclient.so! The usual problem is that this file is located in a directory like
/usr/lib/mysql
where the linker doesn't look for it.
The best workaround is using a statically linked mysqlclient library, for example
/usr/lib/mysql/libmysqlclient.a
The use of a statically linked library is described in the previous section on linker flags. Configuration. Linker flags.
Finally, if everything else fails, you are not alone. First of all, for an immediate answer, you should look into the archives of the mailing list msql-mysql-modules@lists.mysql.com. See http://www.mysql.com for archive locations.
If you don't find an appropriate posting and reply in the mailing list, please post a question. Typically a reply will be seen within one or two days.
INSTALL - How to install and configure DBD::mysql |