| Test::Builder - Backend for building test libraries |
Test::Builder - Backend for building test libraries
package My::Test::Module; use base 'Test::Builder::Module';
my $CLASS = __PACKAGE__;
sub ok {
my($test, $name) = @_;
my $tb = $CLASS->builder;
$tb->ok($test, $name);
}
Test::Simple and Test::More have proven to be popular testing modules, but they're not always flexible enough. Test::Builder provides the a building block upon which to write your own test libraries which can work together.
my $Test = Test::Builder->new;
Returns a Test::Builder object representing the current state of the test.
Since you only run one test per program new always returns the same
Test::Builder object. No matter how many times you call new(), you're
getting the same object. This is called a singleton. This is done so that
multiple modules share such global information as the test counter and
where test output is going.
If you want a completely new Test::Builder object different from the
singleton, use create.
my $Test = Test::Builder->create;
Ok, so there can be more than one Test::Builder object and this is how
you get it. You might use this instead of new() if you're testing
a Test::Builder based module, but otherwise you probably want new.
NOTE: the implementation is not complete. level, for example, is
still shared amongst all Test::Builder objects, even ones created using
this method. Also, the method name may change in the future.
$Test->reset;
Reinitializes the Test::Builder singleton to its original state. Mostly useful for tests run in persistent environments where the same test might be run multiple times in the same process.
These methods are for setting up tests and declaring how many there are. You usually only want to call one of these methods.
$Test->plan('no_plan');
$Test->plan( skip_all => $reason );
$Test->plan( tests => $num_tests );
A convenient way to set up your tests. Call this and Test::Builder will print the appropriate headers and take the appropriate actions.
If you call plan(), don't call any of the other methods below.
my $max = $Test->expected_tests;
$Test->expected_tests($max);
Gets/sets the # of tests we expect this test to run and prints out the appropriate headers.
$Test->no_plan;
Declares that this test will run an indeterminate # of tests.
$plan = $Test->has_plan
Find out whether a plan has been defined. $plan is either undef (no plan has been set), no_plan (indeterminate # of tests) or an integer (the number of expected tests).
$Test->skip_all; $Test->skip_all($reason);
Skips all the tests, using the given $reason. Exits immediately with 0.
my $pack = $Test->exported_to; $Test->exported_to($pack);
Tells Test::Builder what package you exported your functions to.
This method isn't terribly useful since modules which share the same Test::Builder object might get exported to different packages and only the last one will be honored.
These actually run the tests, analogous to the functions in Test::More.
They all return true if the test passed, false if the test failed.
$name is always optional.
$Test->ok($test, $name);
Your basic test. Pass if $test is true, fail if $test is false. Just like Test::Simple's ok().
$Test->is_eq($got, $expected, $name);
Like Test::More's is(). Checks if $got eq $expected. This is the string version.
$Test->is_num($got, $expected, $name);
Like Test::More's is(). Checks if $got == $expected. This is the numeric version.
$Test->isnt_eq($got, $dont_expect, $name);
Like Test::More's isnt(). Checks if $got ne $dont_expect. This is the string version.
$Test->isnt_num($got, $dont_expect, $name);
Like Test::More's isnt(). Checks if $got ne $dont_expect. This is the numeric version.
$Test->like($this, qr/$regex/, $name); $Test->like($this, '/$regex/', $name);
Like Test::More's like(). Checks if $this matches the given $regex.
You'll want to avoid qr// if you want your tests to work before 5.005.
$Test->unlike($this, qr/$regex/, $name); $Test->unlike($this, '/$regex/', $name);
Like Test::More's unlike(). Checks if $this does not match the given $regex.
$Test->cmp_ok($this, $type, $that, $name);
Works just like Test::More's cmp_ok().
$Test->cmp_ok($big_num, '!=', $other_big_num);
These are methods which are used in the course of writing a test but are not themselves tests.
$Test->BAIL_OUT($reason);
Indicates to the Test::Harness that things are going so badly all testing should terminate. This includes running any additional test scripts.
It will exit with 255.
$Test->skip;
$Test->skip($why);
Skips the current test, reporting $why.
$Test->todo_skip; $Test->todo_skip($why);
Like skip(), only it will declare the test as failing and TODO. Similar to
print "not ok $tnum # TODO $why\n";
These methods are useful when writing your own test methods.
$Test->maybe_regex(qr/$regex/);
$Test->maybe_regex('/$regex/');
Convenience method for building testing functions that take regular expressions as arguments, but need to work before perl 5.005.
Takes a quoted regular expression produced by qr//, or a string representing a regular expression.
Returns a Perl value which may be used instead of the corresponding regular expression, or undef if it's argument is not recognised.
For example, a version of like(), sans the useful diagnostic messages, could be written as:
sub laconic_like {
my ($self, $this, $regex, $name) = @_;
my $usable_regex = $self->maybe_regex($regex);
die "expecting regex, found '$regex'\n"
unless $usable_regex;
$self->ok($this =~ m/$usable_regex/, $name);
}
my $is_fh = $Test->is_fh($thing);
Determines if the given $thing can be used as a filehandle.
$Test->level($how_high);
How far up the call stack should $Test look when reporting where the test failed.
Defaults to 1.
Setting the $Test::Builder::Level manpage overrides. This is typically useful localized:
sub my_ok {
my $test = shift;
local $Test::Builder::Level = $Test::Builder::Level + 1;
$TB->ok($test);
}
To be polite to other functions wrapping your own you usually want to increment $Level rather than set it to a constant.
$Test->use_numbers($on_or_off);
Whether or not the test should output numbers. That is, this if true:
ok 1 ok 2 ok 3
or this if false
ok ok ok
Most useful when you can't depend on the test output order, such as when threads or forking is involved.
Defaults to on.
$Test->no_diag($no_diag);
If set true no diagnostics will be printed. This includes calls to diag().
$Test->no_ending($no_ending);
Normally, Test::Builder does some extra diagnostics when the test ends. It also changes the exit code as described below.
If this is true, none of that will be done.
$Test->no_header($no_header);
If set to true, no ``1..N'' header will be printed.
Controlling where the test output goes.
It's ok for your test to change where STDOUT and STDERR point to, Test::Builder's default output settings will not be affected.
$Test->diag(@msgs);
Prints out the given @msgs. Like print, arguments are simply
appended together.
Normally, it uses the failure_output() handle, but if this is for a
TODO test, the todo_output() handle is used.
Output will be indented and marked with a # so as not to interfere with test output. A newline will be put on the end if there isn't one already.
We encourage using this rather than calling print directly.
Returns false. Why? Because diag() is often used in conjunction with
a failing test (ok() || diag()) it ``passes through'' the failure.
return ok(...) || diag(...);
$Test->output($fh);
$Test->output($file);
Where normal ``ok/not ok'' test output should go.
Defaults to STDOUT.
$Test->failure_output($fh);
$Test->failure_output($file);
Where diagnostic output on test failures and diag() should go.
Defaults to STDERR.
$Test->todo_output($fh);
$Test->todo_output($file);
Where diagnostics about todo test failures and diag() should go.
Defaults to STDOUT.
$tb->carp(@message);
Warns with @message but the message will appear to come from the
point where the original test function was called ($tb-caller>).
$tb->croak(@message);
Dies with @message but the message will appear to come from the
point where the original test function was called ($tb-caller>).
my $curr_test = $Test->current_test;
$Test->current_test($num);
Gets/sets the current test number we're on. You usually shouldn't have to set this.
If set forward, the details of the missing tests are filled in as 'unknown'. if set backward, the details of the intervening tests are deleted. You can erase history if you really want to.
my @tests = $Test->summary;
A simple summary of the tests so far. True for pass, false for fail. This is a logical pass/fail, so todos are passes.
Of course, test #1 is $tests[0], etc...
my @tests = $Test->details;
Like summary(), but with a lot more detail.
$tests[$test_num - 1] =
{ 'ok' => is the test considered a pass?
actual_ok => did it literally say 'ok'?
name => name of the test (if any)
type => type of test (if any, see below).
reason => reason for the above (if any)
};
'ok' is true if Test::Harness will consider the test to be a pass.
'actual_ok' is a reflection of whether or not the test literally printed 'ok' or 'not ok'. This is for examining the result of 'todo' tests.
'name' is the name of the test.
'type' indicates if it was a special test. Normal tests have a type of ''. Type can be one of the following:
skip see skip()
todo see todo()
todo_skip see todo_skip()
unknown see below
Sometimes the Test::Builder test counter is incremented without it
printing any test output, for example, when current_test() is changed.
In these cases, Test::Builder doesn't know the result of the test, so
it's type is 'unkown'. These details for these tests are filled in.
They are considered ok, but the name and actual_ok is left undef.
For example ``not ok 23 - hole count # TODO insufficient donuts'' would result in this structure:
$tests[22] = # 23 - 1, since arrays start from 0.
{ ok => 1, # logically, the test passed since it's todo
actual_ok => 0, # in absolute terms, it failed
name => 'hole count',
type => 'todo',
reason => 'insufficient donuts'
};
my $todo_reason = $Test->todo;
my $todo_reason = $Test->todo($pack);
todo() looks for a $TODO variable in your tests. If set, all tests
will be considered 'todo' (see Test::More and Test::Harness for
details). Returns the reason (ie. the value of $TODO) if running as
todo tests, false otherwise.
todo() is about finding the right package to look for $TODO in. It's
pretty good at guessing the right package to look at. It first looks for
the caller based on $Level + 1, since todo() is usually called inside
a test function. As a last resort it will use exported_to().
Sometimes there is some confusion about where todo() should be looking
for the $TODO variable. If you want to be sure, tell it explicitly
what $pack to use.
my $package = $Test->caller;
my($pack, $file, $line) = $Test->caller;
my($pack, $file, $line) = $Test->caller($height);
Like the normal caller(), except it reports according to your level().
$height will be added to the level().
If all your tests passed, Test::Builder will exit with zero (which is normal). If anything failed it will exit with how many failed. If you run less (or more) tests than you planned, the missing (or extras) will be considered failures. If no tests were ever run Test::Builder will throw a warning and exit with 255. If the test died, even after having successfully completed all its tests, it will still be considered a failure and will exit with 255.
So the exit codes are...
0 all tests successful
255 test died or all passed but wrong # of tests run
any other number how many failed (including missing or extras)
If you fail more than 254 tests, it will be reported as 254.
In perl 5.8.1 and later, Test::Builder is thread-safe. The test
number is shared amongst all threads. This means if one thread sets
the test number using current_test() they will all be effected.
While versions earlier than 5.8.1 had threads they contain too many bugs to support.
Test::Builder is only thread-aware if threads.pm is loaded before Test::Builder.
CPAN can provide the best examples. Test::Simple, Test::More, Test::Exception and Test::Differences all use Test::Builder.
Test::Simple, Test::More, Test::Harness
Original code by chromatic, maintained by Michael G Schwern <schwern@pobox.com>
Copyright 2002, 2004 by chromatic <chromatic@wgz.org> and Michael G Schwern <schwern@pobox.com>.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
See http://www.perl.com/perl/misc/Artistic.html
| Test::Builder - Backend for building test libraries |