| Inline::C - Write Perl Subroutines in C |
Inline::C - Write Perl Subroutines in C
Inline::C is a module that allows you to write Perl subroutines in C.
Since version 0.30 the Inline module supports multiple programming
languages and each language has its own support module. This document
describes how to use Inline with the C programming language. It also
goes a bit into Perl C internals.
If you want to start working with programming examples right away, check out the Inline::C-Cookbook manpage. For more information on Inline in general, see the Inline manpage.
You never actually use Inline::C directly. It is just a support
module for using Inline.pm with C. So the usage is always:
use Inline C => ...;
or
bind Inline C => ...;
The Inline grammar for C recognizes certain function definitions (or signatures) in your C code. If a signature is recognized by Inline, then it will be available in Perl-space. That is, Inline will generate the ``glue'' necessary to call that function as if it were a Perl subroutine. If the signature is not recognized, Inline will simply ignore it, with no complaints. It will not be available from Perl-space, although it will be available from C-space.
Inline looks for ANSI/prototype style function definitions. They must be of the form:
return-type function-name ( type-name-pairs ) { ... }
The most common types are: int, long, double, char*, and
SV*. But you can use any type for which Inline can find a typemap.
Inline uses the typemap file distributed with Perl as the default.
You can specify more typemaps with the TYPEMAPS configuration option.
A return type of void may also be used. The following are examples of
valid function definitions.
int Foo(double num, char* str) {
void Foo(double num, char* str) {
SV* Foo() {
void Foo(SV*, ...) {
long Foo(int i, int j, ...) {
The following definitions would not be recognized:
Foo(int i) { # no return type
int Foo(float f) { # no (default) typemap for float
int Foo(num, str) double num; char* str; {
void Foo(void) { # void only valid for return type
Notice that Inline only looks for function definitions, not function prototypes. Definitions are the syntax directly preceeding a function body. Also Inline does not scan external files, like headers. Only the code passed to Inline is used to create bindings; although other libraries can linked in, and called from C-space.
For information on how to specify Inline configuration options, see the Inline manpage. This section describes each of the configuration options available for C. Most of the options correspond either to MakeMaker or XS options of the same name. See the ExtUtils::MakeMaker manpage and the perlxs manpage.
Specifies extra statements to automatically included. They will be added onto the defaults. A newline char will be automatically added.
use Inline C => Config => AUTO_INCLUDE => '#include "yourheader.h"';
If you 'ENABLE => AUTOWRAP', Inline::C will parse function declarations (prototype statements) in your C code. For each declaration it can bind to, it will create a dummy wrapper that will call the real function which may be in an external library. This is a nice convenience for functions that would otherwise just require an empty wrapper function.
This is similar to the base functionality you get from h2xs. It can
be very useful for binding to external libraries.
Specifies C code to be executed in the XS BOOT section. Corresponds to the XS parameter.
Specify which compiler to use.
Specify extra compiler flags.
Allows you to specify a list of source code filters. If more than one is requested, be sure to group them with an array ref. The filters can either be subroutine references or names of filters provided by the supplementary Inline::Filters module.
Your source code will be filtered just before it is parsed by Inline. The MD5 fingerprint is generated before filtering. Source code filters can be used to do things like stripping out POD documentation, pre-expanding #include statements or whatever else you please. For example:
use Inline C => DATA =>
FILTERS => [Strip_POD => \&MyFilter => Preprocess ];
Filters are invoked in the order specified. See the Inline::Filters manpage for more information.
Specifies an include path to use. Corresponds to the MakeMaker parameter.
use Inline C => Config => INC => '-I/inc/path';
Specify which linker to use.
Specify which linker flags to use.
NOTE: These flags will completely override the existing flags, instead of just adding to them. So if you need to use those too, you must respecify them here.
Specifies external libraries that should be linked into your code. Corresponds to the MakeMaker parameter.
use Inline C => Config => LIBS => '-lyourlib';
or
use Inline C => Config => LIBS => '-L/your/path -lyourlib';
Specify the name of the 'make' utility to use.
Specifies a user compiled object that should be linked in. Corresponds to the MakeMaker parameter.
use Inline C => Config => MYEXTLIB => '/your/path/yourmodule.so';
This controls the MakeMaker OPTIMIZE setting. By setting this value to
'-g', you can turn on debugging support for your Inline extensions.
This will allow you to be able to set breakpoints in your C code using a
debugger like gdb.
Specifies a prefix that will be automatically stripped from C functions when they are bound to Perl. Useful for creating wrappers for shared library API-s, and binding to the original names in Perl. Also useful when names conflict with Perl internals. Corresponds to the XS parameter.
use Inline C => Config => PREFIX => 'ZLIB_';
Specifies extra typemap files to use. These types will modify the behaviour of the C parsing. Corresponds to the MakeMaker parameter.
use Inline C => Config => TYPEMAPS => '/your/path/typemap';
This section describes how the Perl variables get mapped to C
variables and back again.
First, you need to know how Perl passes arguments back and forth to
subroutines. Basically it uses a stack (also known as the Stack).
When a sub is called, all of the parenthesized arguments get expanded
into a list of scalars and pushed onto the Stack. The subroutine then
pops all of its parameters off of the Stack. When the sub is done, it
pushes all of its return values back onto the Stack.
The Stack is an array of scalars known internally as SV's. The
Stack is actually an array of pointers to SV or SV*; therefore
every element of the Stack is natively a SV*. For FMTYEWTK
about this, read perldoc perlguts.
So back to variable mapping. XS uses a thing known as ``typemaps'' to turn
each SV* into a C type and back again. This is done through
various XS macro calls, casts and the Perl API. See perldoc perlapi.
XS allows you to define your own typemaps as well for fancier
non-standard types such as typedef-ed structs.
Inline uses the default Perl typemap file for its default types. This
file is called /usr/local/lib/perl5/5.6.1/ExtUtils/typemap, or
something similar, depending on your Perl installation. It has
definitions for over 40 types, which are automatically used by Inline.
(You should probably browse this file at least once, just to get an idea
of the possibilities.)
Inline parses your code for these types and generates the XS code to map them. The most commonly used types are:
- int - long - double - char* - void - SV*
If you need to deal with a type that is not in the defaults, just
use the generic SV* type in the function definition. Then inside
your code, do the mapping yourself. Alternatively, you can create
your own typemap files and specify them using the TYPEMAPS
configuration option.
A return type of void has a special meaning to Inline. It means that
you plan to push the values back onto the Stack yourself. This is
what you need to do to return a list of values. If you really don't want
to return anything (the traditional meaning of void) then simply
don't push anything back.
If ellipsis or ... is used at the end of an argument list, it means
that any number of SV*s may follow. Again you will need to pop the
values off of the Stack yourself.
See Examples below.
When you write Inline C, the following lines are automatically prepended to your code (by default):
#include "EXTERN.h"
#include "perl.h"
#include "XSUB.h"
#include "INLINE.h"
The file INLINE.h defines a set of macros that are useful for
handling the Perl Stack from your C functions.
sp, items, ax and mark, for use by the
other macros. It's not important to know what they do, but I mention
them to avoid possible name conflicts.
NOTE:
Since this macro declares variables, you'll need to put it with your
other variable declarations at the top of your function. It must
come before any executable statements and before any other
Inline_Stack macros.
Inline_Stack_Item(i)SV* in the Stack, where i is an index
number starting from zero. Can be used to get or set the value.
Inline_Stack_Push(sv)SV*.
Inline_Stack_Return(n)n items on the Stack.
Inline_Stack_Return(0);
Please note that this macro actually returns from your function.
Each of these macros is available in 3 different styles to suit your coding tastes. The following macros are equivalent.
Inline_Stack_Vars
inline_stack_vars
INLINE_STACK_VARS
All of this functionality is available through XS macro calls as well. So why duplicate the functionality? There are a few reasons why I decided to offer this set of macros. First, as a convenient way to access the Stack. Second, for consistent, self documenting, non-cryptic coding. Third, for future compatibility. It occured to me that if a lot of people started using XS macros for their C code, the interface might break under Perl6. By using this set, hopefully I will be able to insure future compatibility of argument handling.
Of course, if you use the rest of the Perl API, your code will most likely break under Perl6. So this is not a 100% guarantee. But since argument handling is the most common interface you're likely to use, it seemed like a wise thing to do.
The definitions of your C functions will fall into one of the following four categories. For each category there are special considerations.
int Foo(int arg1, char* arg2, SV* arg3) {
This is the simplest case. You have a non void return type and a
fixed length argument list. You don't need to worry about much. All the
conversions will happen automatically.
void Foo(int arg1, char* arg2, SV* arg3) {
In this category you have a void return type. This means that either
you want to return nothing, or that you want to return a list. In the
latter case you'll need to push values onto the Stack yourself. There
are a few Inline macros that make this easy. Code something like this:
int i, max; SV* my_sv[10];
Inline_Stack_Vars;
Inline_Stack_Reset;
for (i = 0; i < max; i++)
Inline_Stack_Push(my_sv[i]);
Inline_Stack_Done;
After resetting the Stack pointer, this code pushes a series of return
values. At the end it uses Inline_Stack_Done to mark the end of the
return stack.
If you really want to return nothing, then don't use the
Inline_Stack_ macros. If you must use them, then set use
Inline_Stack_Void at the end of your function.
char* Foo(SV* arg1, ...) {
In this category you have an unfixed number of arguments. This means that you'll have to pop values off the Stack yourself. Do it like this:
int i;
Inline_Stack_Vars;
for (i = 0; i < Inline_Stack_Items; i++)
handle_sv(Inline_Stack_Item(i));
The return type of Inline_Stack_Item(i) is SV*.
void* Foo(SV* arg1, ...) {
In this category you have both a void return type and an
unfixed number of arguments. Just combine the techniques from
Categories 3 and 4.
Here are a few examples. Each one is a complete program that you can try running yourself. For many more examples see the Inline::C-Cookbook manpage.
This example will take one string argument (a name) and print a greeting. The function is called with a string and with a number. In the second case the number is forced to a string.
Notice that you do not need to #include <stdio.h>. The perl.h
header file which gets included by default, automatically loads the
standard C header files for you.
use Inline C;
greet('Ingy');
greet(42);
__END__
__C__
void greet(char* name) {
printf("Hello %s!\n", name);
}
This is similar to the last example except that the name is passed in as
a SV* (pointer to Scalar Value) rather than a string (char*). That
means we need to convert the SV to a string ourselves. This is
accomplished using the SvPVX function which is part of the Perl
internal API. See perldoc perlapi for more info.
One problem is that SvPVX doesn't automatically convert strings
to numbers, so we get a little surprise when we try to greet 42.
The program segfaults, a common occurence when delving into the
guts of Perl.
use Inline C;
greet('Ingy');
greet(42);
__END__
__C__
void greet(SV* sv_name) {
printf("Hello %s!\n", SvPVX(sv_name));
}
We can fix the problem in Example #2 by using the SvPV function
instead. This function will stringify the SV if it does not contain a
string. SvPV returns the length of the string as it's second
parameter. Since we don't care about the length, we can just put
PL_na there, which is a special variable designed for that purpose.
use Inline C;
greet('Ingy');
greet(42);
__END__
__C__
void greet(SV* sv_name) {
printf("Hello %s!\n", SvPV(sv_name, PL_na));
}
For general information about Inline see the Inline manpage.
For sample programs using Inline with C see the Inline::C-Cookbook manpage.
For information on supported languages and platforms see the Inline-Support manpage.
For information on writing your own Inline Language Support Module, see the Inline-API manpage.
Inline's mailing list is inline@perl.org
To subscribe, send email to inline-subscribe@perl.org
'symbols.perl'. Avoid using these in your code.
Brian Ingerson <INGY@cpan.org>
Copyright (c) 2000, 2001, 2002. Brian Ingerson. All rights reserved.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
See http://www.perl.com/perl/misc/Artistic.html
| Inline::C - Write Perl Subroutines in C |