| perlintro -- a brief introduction and overview of Perl |
perlintro -- a brief introduction and overview of Perl
This document is intended to give you a quick overview of the Perl programming language, along with pointers to further documentation. It is intended as a ``bootstrap'' guide for those who are new to the language, and provides just enough information for you to be able to read other peoples' Perl and understand roughly what it's doing, or write your own simple scripts.
This introductory document does not aim to be complete. It does not even aim to be entirely accurate. In some cases perfection has been sacrificed in the goal of getting the general idea across. You are strongly advised to follow this introduction with more information from the full Perl manual, the table of contents to which can be found in the perltoc manpage.
Throughout this document you'll see references to other parts of the
Perl documentation. You can read that documentation using the perldoc
command or whatever method you're using to read this document.
Perl is a general-purpose programming language originally developed for text manipulation and now used for a wide range of tasks including system administration, web development, network programming, GUI development, and more.
The language is intended to be practical (easy to use, efficient, complete) rather than beautiful (tiny, elegant, minimal). Its major features are that it's easy to use, supports both procedural and object-oriented (OO) programming, has powerful built-in support for text processing, and has one of the world's most impressive collections of third-party modules.
Different definitions of Perl are given in the perl manpage, the perlfaq1 manpage and no doubt other places. From this we can determine that Perl is different things to different people, but that lots of people think it's at least worth writing about.
To run a Perl program from the Unix command line:
perl progname.pl
Alternatively, put this as the first line of your script:
#!/usr/bin/env perl
... and run the script as /path/to/script.pl. Of course, it'll need
to be executable first, so chmod 755 script.pl (under Unix).
For more information, including instructions for other platforms such as Windows and Mac OS, read the perlrun manpage.
A Perl script or program consists of one or more statements. These
statements are simply written in the script in a straightforward
fashion. There is no need to have a main() function or anything of
that kind.
Perl statements end in a semi-colon:
print "Hello, world";
Comments start with a hash symbol and run to the end of the line
# This is a comment
Whitespace is irrelevant:
print
"Hello, world"
;
... except inside quoted strings:
# this would print with a linebreak in the middle
print "Hello
world";
Double quotes or single quotes may be used around literal strings:
print "Hello, world";
print 'Hello, world';
However, only double quotes ``interpolate'' variables and special
characters such as newlines (\n):
print "Hello, $name\n"; # works fine
print 'Hello, $name\n'; # prints $name\n literally
Numbers don't need quotes around them:
print 42;
You can use parentheses for functions' arguments or omit them according to your personal taste. They are only required occasionally to clarify issues of precedence.
print("Hello, world\n");
print "Hello, world\n";
More detailed information about Perl syntax can be found in the perlsyn manpage.
Perl has three main variable types: scalars, arrays, and hashes.
my $animal = "camel";
my $answer = 42;
Scalar values can be strings, integers or floating point numbers, and Perl will automatically convert between them as required. There is no need to pre-declare your variable types.
Scalar values can be used in various ways:
print $animal;
print "The animal is $animal\n";
print "The square of $answer is ", $answer * $answer, "\n";
There are a number of ``magic'' scalars with names that look like
punctuation or line noise. These special variables are used for all
kinds of purposes, and are documented in the perlvar manpage. The only one you
need to know about for now is $_ which is the ``default variable''.
It's used as the default argument to a number of functions in Perl, and
it's set implicitly by certain looping constructs.
print; # prints contents of $_ by default
my @animals = ("camel", "llama", "owl");
my @numbers = (23, 42, 69);
my @mixed = ("camel", 42, 1.23);
Arrays are zero-indexed. Here's how you get at elements in an array:
print $animals[0]; # prints "camel"
print $animals[1]; # prints "llama"
The special variable $#array tells you the index of the last element
of an array:
print $mixed[$#mixed]; # last element, prints 1.23
You might be tempted to use $#array + 1 to tell you how many items there
are in an array. Don't bother. As it happens, using @array where Perl
expects to find a scalar value (``in scalar context'') will give you the number
of elements in the array:
if (@animals < 5) { ... }
The elements we're getting from the array start with a $ because
we're getting just a single value out of the array -- you ask for a scalar,
you get a scalar.
To get multiple values from an array:
@animals[0,1]; # gives ("camel", "llama");
@animals[0..2]; # gives ("camel", "llama", "owl");
@animals[1..$#animals]; # gives all except the first element
This is called an ``array slice''.
You can do various useful things to lists:
my @sorted = sort @animals;
my @backwards = reverse @numbers;
There are a couple of special arrays too, such as @ARGV (the command
line arguments to your script) and @_ (the arguments passed to a
subroutine). These are documented in the perlvar manpage.
my %fruit_color = ("apple", "red", "banana", "yellow");
You can use whitespace and the => operator to lay them out more
nicely:
my %fruit_color = (
apple => "red",
banana => "yellow",
);
To get at hash elements:
$fruit_color{"apple"}; # gives "red"
You can get at lists of keys and values with keys() and
values().
my @fruits = keys %fruit_colors;
my @colors = values %fruit_colors;
Hashes have no particular internal order, though you can sort the keys and loop through them.
Just like special scalars and arrays, there are also special hashes.
The most well known of these is %ENV which contains environment
variables. Read all about it (and other special variables) in
the perlvar manpage.
Scalars, arrays and hashes are documented more fully in the perldata manpage.
More complex data types can be constructed using references, which allow you to build lists and hashes within lists and hashes.
A reference is a scalar value and can refer to any other Perl data type. So by storing a reference as the value of an array or hash element, you can easily create lists and hashes within lists and hashes. The following example shows a 2 level hash of hash structure using anonymous hash references.
my $variables = {
scalar => {
description => "single item",
sigil => '$',
},
array => {
description => "ordered list of items",
sigil => '@',
},
hash => {
description => "key/value pairs",
sigil => '%',
},
};
print "Scalars begin with a $variables->{'scalar'}->{'sigil'}\n";
Exhaustive information on the topic of references can be found in the perlreftut manpage, the perllol manpage, the perlref manpage and the perldsc manpage.
Throughout the previous section all the examples have used the syntax:
my $var = "value";
The my is actually not required; you could just use:
$var = "value";
However, the above usage will create global variables throughout your
program, which is bad programming practice. my creates lexically
scoped variables instead. The variables are scoped to the block
(i.e. a bunch of statements surrounded by curly-braces) in which they
are defined.
my $a = "foo";
if ($some_condition) {
my $b = "bar";
print $a; # prints "foo"
print $b; # prints "bar"
}
print $a; # prints "foo"
print $b; # prints nothing; $b has fallen out of scope
Using my in combination with a use strict; at the top of
your Perl scripts means that the interpreter will pick up certain common
programming errors. For instance, in the example above, the final
print $b would cause a compile-time error and prevent you from
running the program. Using strict is highly recommended.
Perl has most of the usual conditional and looping constructs except for case/switch (but if you really want it, there is a Switch module in Perl 5.8 and newer, and on CPAN. See the section on modules, below, for more information about modules and CPAN).
The conditions can be any Perl expression. See the list of operators in the next section for information on comparison and boolean logic operators, which are commonly used in conditional statements.
if ( condition ) {
...
} elsif ( other condition ) {
...
} else {
...
}
There's also a negated version of it:
unless ( condition ) {
...
}
This is provided as a more readable version of if (!condition).
Note that the braces are required in Perl, even if you've only got one line in the block. However, there is a clever way of making your one-line conditional blocks more English like:
# the traditional way
if ($zippy) {
print "Yow!";
}
# the Perlish post-condition way
print "Yow!" if $zippy;
print "We have no bananas" unless $bananas;
while ( condition ) {
...
}
There's also a negated version, for the same reason we have unless:
until ( condition ) {
...
}
You can also use while in a post-condition:
print "LA LA LA\n" while 1; # loops forever
for ($i=0; $i <= $max; $i++) {
...
}
The C style for loop is rarely needed in Perl since Perl provides
the more friendly list scanning foreach loop.
foreach (@array) {
print "This element is $_\n";
}
# you don't have to use the default $_ either...
foreach my $key (keys %hash) {
print "The value of $key is $hash{$key}\n";
}
For more detail on looping constructs (and some that weren't mentioned in this overview) see the perlsyn manpage.
Perl comes with a wide selection of builtin functions. Some of the ones
we've already seen include print, sort and reverse. A list of
them is given at the start of the perlfunc manpage and you can easily read
about any given function by using perldoc -f functionname.
Perl operators are documented in full in the perlop manpage, but here are a few of the most common ones:
+ addition
- subtraction
* multiplication
/ division
== equality
!= inequality
< less than
> greater than
<= less than or equal
>= greater than or equal
eq equality
ne inequality
lt less than
gt greater than
le less than or equal
ge greater than or equal
(Why do we have separate numeric and string comparisons? Because we don't have special variable types, and Perl needs to know whether to sort numerically (where 99 is less than 100) or alphabetically (where 100 comes before 99).
&& and
|| or
! not
(and, or and not aren't just in the above table as descriptions
of the operators -- they're also supported as operators in their own
right. They're more readable than the C-style operators, but have
different precedence to && and friends. Check the perlop manpage for more
detail.)
= assignment
. string concatenation
x string multiplication
.. range operator (creates a list of numbers)
Many operators can be combined with a = as follows:
$a += 1; # same as $a = $a + 1
$a -= 1; # same as $a = $a - 1
$a .= "\n"; # same as $a = $a . "\n";
You can open a file for input or output using the open() function.
It's documented in extravagant detail in the perlfunc manpage and the perlopentut manpage,
but in short:
open(INFILE, "input.txt") or die "Can't open input.txt: $!";
open(OUTFILE, ">output.txt") or die "Can't open output.txt: $!";
open(LOGFILE, ">>my.log") or die "Can't open logfile: $!";
You can read from an open filehandle using the <> operator. In
scalar context it reads a single line from the filehandle, and in list
context it reads the whole file in, assigning each line to an element of
the list:
my $line = <INFILE>;
my @lines = <INFILE>;
Reading in the whole file at one time is called slurping. It can be useful but it may be a memory hog. Most text file processing can be done a line at a time with Perl's looping constructs.
The <> operator is most often seen in a while loop:
while (<INFILE>) { # assigns each line in turn to $_
print "Just read in this line: $_";
}
We've already seen how to print to standard output using print().
However, print() can also take an optional first argument specifying
which filehandle to print to:
print STDERR "This is your final warning.\n";
print OUTFILE $record;
print LOGFILE $logmessage;
When you're done with your filehandles, you should close() them
(though to be honest, Perl will clean up after you if you forget):
close INFILE;
Perl's regular expression support is both broad and deep, and is the subject of lengthy documentation in the perlrequick manpage, the perlretut manpage, and elsewhere. However, in short:
if (/foo/) { ... } # true if $_ contains "foo"
if ($a =~ /foo/) { ... } # true if $a contains "foo"
The // matching operator is documented in the perlop manpage. It operates on
$_ by default, or can be bound to another variable using the =~
binding operator (also documented in the perlop manpage).
s/foo/bar/; # replaces foo with bar in $_
$a =~ s/foo/bar/; # replaces foo with bar in $a
$a =~ s/foo/bar/g; # replaces ALL INSTANCES of foo with bar in $a
The s/// substitution operator is documented in the perlop manpage.
. a single character
\s a whitespace character (space, tab, newline)
\S non-whitespace character
\d a digit (0-9)
\D a non-digit
\w a word character (a-z, A-Z, 0-9, _)
\W a non-word character
[aeiou] matches a single character in the given set
[^aeiou] matches a single character outside the given set
(foo|bar|baz) matches any of the alternatives specified
^ start of string
$ end of string
Quantifiers can be used to specify how many of the previous thing you want to match on, where ``thing'' means either a literal character, one of the metacharacters listed above, or a group of characters or metacharacters in parentheses.
* zero or more of the previous thing
+ one or more of the previous thing
? zero or one of the previous thing
{3} matches exactly 3 of the previous thing
{3,6} matches between 3 and 6 of the previous thing
{3,} matches 3 or more of the previous thing
Some brief examples:
/^\d+/ string starts with one or more digits
/^$/ nothing in the string (start and end are adjacent)
/(\d\s){3}/ a three digits, each followed by a whitespace
character (eg "3 4 5 ")
/(a.)+/ matches a string in which every odd-numbered letter
is a (eg "abacadaf")
# This loop reads from STDIN, and prints non-blank lines:
while (<>) {
next if /^$/;
print;
}
$1, $2 and so on.
# a cheap and nasty way to break an email address up into parts
if ($email =~ /([^@])+@(.+)/) {
print "Username is $1\n";
print "Hostname is $2\n";
}
Writing subroutines is easy:
sub log {
my $logmessage = shift;
print LOGFILE $logmessage;
}
What's that shift? Well, the arguments to a subroutine are available
to us as a special array called @_ (see the perlvar manpage for more on that).
The default argument to the shift function just happens to be @_.
So my $logmessage = shift; shifts the first item off the list of
arguments and assigns it to $logmessage.
We can manipulate @_ in other ways too:
my ($logmessage, $priority) = @_; # common
my $logmessage = $_[0]; # uncommon, and ugly
Subroutines can also return values:
sub square {
my $num = shift;
my $result = $num * $num;
return $result;
}
For more information on writing subroutines, see the perlsub manpage.
OO Perl is relatively simple and is implemented using references which know what sort of object they are based on Perl's concept of packages. However, OO Perl is largely beyond the scope of this document. Read the perlboot manpage, the perltoot manpage, the perltooc manpage and the perlobj manpage.
As a beginning Perl programmer, your most common use of OO Perl will be in using third-party modules, which are documented below.
Perl modules provide a range of features to help you avoid reinventing the wheel, and can be downloaded from CPAN ( http://www.cpan.org/ ). A number of popular modules are included with the Perl distribution itself.
Categories of modules range from text manipulation to network protocols to database integration to graphics. A categorized list of modules is also available from CPAN.
To learn how to install modules you download from CPAN, read the perlmodinstall manpage
To learn how to use a particular module, use perldoc Module::Name.
Typically you will want to use Module::Name, which will then give
you access to exported functions or an OO interface to the module.
the perlfaq manpage contains questions and answers related to many common tasks, and often provides suggestions for good CPAN modules to use.
the perlmod manpage describes Perl modules in general. the perlmodlib manpage lists the modules which came with your Perl installation.
If you feel the urge to write Perl modules, the perlnewmod manpage will give you good advice.
Kirrily ``Skud'' Robert <skud@cpan.org>
| perlintro -- a brief introduction and overview of Perl |